Toilet Installation in Dallas, TX — Licensed Plumbers Who Get It Right the First Time

A new toilet does more than fix a problem. It stops leaks that damage your bathroom floor, cuts your water bill, and puts an end to constant repairs on a worn-out unit. Baker Brothers has installed and replaced toilets across Dallas since 1945. That's 80 years of plumbing work — and we still handle every install the same way: measure twice, seal it right, and test before we leave.

We handle full toilet replacement, new installations, and upgrades from older high-flush models. Whether your bowl is cracked, your toilet won't stop running, or you're replacing outdated fixtures in an older East Dallas or Lakewood home, we match you with the right unit and install it correctly.

Call Baker Brothers Today to schedule toilet installation. Our plumbers are state-licensed, background-checked, and trained to handle the full job — removal, fitting, sealing, and testing. We provide upfront quotes before any work begins so you know exactly what to expect.

The most common toilet installation mistakes happen when the wax ring, flange, or bolts are handled incorrectly. These errors lead to leaks, rocking, and water damage that cost more to fix than the original installation.

Watch for these frequent problems:

• Using the wrong size wax ring or gasket, which creates a weak seal that leaks at the base
• Setting the toilet on an uneven surface without shimming, which causes rocking and breaks the seal over time
• Overtightening closet bolts, which cracks the porcelain base
• Failing to inspect or replace a damaged flange before mounting the new toilet

A licensed plumber checks each of these before finishing the job.

Installing a toilet looks simple from the outside. But the work beneath the surface is where problems start. A poor seal, a cracked flange, or a bolt tightened half a turn too far can turn a quick job into a costly repair.

The wax ring sits between the toilet base and the drain flange. If the ring doesn't match the flange height, sewage gas and water seep out at the base. An unleveled toilet rocks with use and breaks that seal within weeks. Overtightened bolts crack porcelain — and a cracked base means buying a second toilet.

A licensed plumber inspects the flange before setting the new unit. If it's corroded, cracked, or sitting too low, we repair or replace it first. Dallas building code requires plumbing work to meet specific standards. In slab-foundation homes common across North Texas, a failed toilet seal can send water into the subfloor with no crawl space to catch it.

We set the toilet level, tighten bolts to the right spec, connect the supply line, and test for leaks before we leave. You get a solid install that holds — not a weekend project that calls you back to mop.

Not every toilet problem needs a full replacement. But when the same issues keep coming back, another repair is just delaying the inevitable.

A toilet that clogs every week, runs constantly after flushing, or wobbles on its base is telling you something. Hairline cracks in the bowl or tank get worse over time — and a crack below the waterline will eventually leak onto your floor. Water pooling around the base, even after replacing the wax ring, often means the flange or the toilet itself has failed.

Age matters too. Many homes in East Dallas and Mesquite still have original toilets from the 1970s through 1990s. These older units use 3.5 to 5 gallons per flush and rely on parts that are harder to find each year. Internal components wear out, flush valves warp, and fill valves lose their seal.

If you're calling a plumber more than once a year for the same toilet, replacement is the smarter move. One new toilet ends the cycle of temporary fixes and starts saving water from day one.

Picking a toilet is more than choosing a color. The model you select needs to fit your bathroom layout, match your household size, and connect to your existing plumbing without modification.

The first measurement that matters is the rough-in — the distance from the wall behind the toilet to the center of the drain pipe. Most Dallas homes use a standard 12-inch rough-in. Older Lakewood homes may have a 10-inch or 14-inch rough-in, which limits your options if you don't measure before you buy.

One-piece toilets have the tank and bowl fused together. They're easier to clean and sit lower in tight spaces. Two-piece toilets have a separate tank bolted to the bowl. They cost less and are easier to move into small bathrooms.

Bowl shape matters for comfort and space. Elongated bowls offer more room and are preferred in most homes. Round bowls save about two inches of floor space — a better fit in half-baths and small powder rooms common in older East Dallas floor plans.

Standard height toilets sit about 15 inches from floor to seat. Comfort height models sit at 17 to 19 inches, making it easier to sit and stand. Newer homes in Lake Highlands typically have room for either style. We help you match the right toilet to your bathroom before install day — so there are no returns or refitting.

A toilet replacement follows a clear sequence. Knowing what happens at each step removes any guesswork and helps you plan your day.

We start by shutting off the water supply and draining the old toilet. The tank and bowl are disconnected, removed, and taken out of your bathroom. We dispose of the old unit for you — there's no need to haul it yourself.

With the old toilet removed, we inspect the closet flange and the area around the drain. If the flange is cracked, corroded, or sitting at the wrong height, we repair or replace it before going any further. A damaged flange is the leading cause of toilet leaks, and skipping this step leads to problems within months.

Next, we place a new wax ring or gasket, set the toilet over the flange, and press it into position. The unit is leveled, shimmed if needed, and secured with closet bolts tightened to the correct spec. We connect the supply line, turn the water back on, and flush several times to check for leaks at every connection point.

Before we leave, we confirm the toilet sits firm, the seal holds, and the flush cycle runs properly. Every installation in Dallas follows local plumbing code. If a permit or inspection is needed, we handle the coordination.

Older toilets are one of the biggest water wasters in a Dallas home. Models from the 1980s and 1990s use 3.5 to 5 gallons every time you flush. In a household of four, that adds up to thousands of extra gallons each year.

WaterSense-labeled toilets use 1.28 gallons per flush or less. That's a drop of more than 60 percent compared to older units — without sacrificing flush power. Today's low-flow models are engineered to clear the bowl in a single flush using pressurized rinse or gravity-fed designs.

Dallas water rates have climbed over the past decade. Replacing even one old toilet makes a noticeable difference on your monthly bill. In homes across Mesquite and Garland with multiple bathrooms, swapping two or three toilets multiplies those savings quickly.

A water-saving toilet also reduces strain on aging drain lines and sewer pipes. Less water per flush means less pressure on connections that may already be weakened by North Texas clay soil movement. You save money and put less stress on the plumbing behind your walls.

Some homeowners put off replacing a toilet because they expect a messy, all-day project. In most cases, the job is much simpler than that.

A standard toilet replacement takes 1 to 2 hours from start to finish. There's no major demolition, no overnight wait, and no need to shut down your entire bathroom for days. Our technicians remove the old unit, inspect the flange, install the new toilet, and test everything in a single visit.

If the flange needs repair or the floor requires leveling, the job may take slightly longer. But even with extra steps, most installations wrap up the same day. We let you know the full scope before we start so there are no surprises.

We offer same-day toilet replacement service across Dallas, including Garland and Balch Springs. Our technicians arrive with tools and parts ready — so there's no second trip. One visit, one install, and your new toilet is ready to use before the end of the day.

Baker Brothers has installed and replaced toilets across Dallas since 1945. That's four generations of plumbing expertise from state-licensed, background-checked technicians who do this work every day.

We handle removal, installation, sealing, and testing — one visit, no loose ends. Whether you need a simple swap or an upgrade to a water-saving model, we size the right toilet for your bathroom and install it correctly the first time.

Call (214) 324-8811 to schedule toilet installation in Dallas.

Located at: 2615 Big Town Blvd, Mesquite, TX 75150