Faucet problems disrupt Dallas kitchens and bathrooms daily. Baker Brothers installs, repairs, and maintains all faucet types. We've served Dallas homeowners for 80 years with licensed plumber expertise. We handle faucets you buy or recommend quality options that fit your needs.

Common services include dripping faucet repair, new installations, cartridge replacement, and leak fixes. We work on kitchen faucets, bathroom faucets, and specialty fixtures. Same-day service is available for most faucet problems. Proper installation prevents future leaks and water damage.

Call Baker Brothers today for faucet service in Dallas. Our customer service team answers calls 24/7. Licensed plumbers handle installation and repairs correctly. Located at 2615 Big Town Blvd, Mesquite, TX 75150.

Dallas faucets show clear warning signs before they fail completely. Recognizing these problems early prevents water damage and helps you decide between repair and replacement. Here's what to watch for in your kitchen and bathroom faucets.

Constant dripping wastes water and money even when handles are fully closed. A dripping faucet means worn washers or damaged cartridges. The seal no longer stops water flow completely. One dripping faucet wastes 3,000 gallons per year and drives up your water bill.

Low water pressure indicates mineral buildup inside the faucet. Dallas hard water deposits calcium and magnesium inside aerators and cartridges. The buildup restricts water flow over time. You notice weaker stream pressure at one faucet while others work normally.

Visible corrosion or rust appears on the fixture body or handles. The finish breaks down from age and water exposure. Rust spots indicate internal corrosion too. Corroded faucets often leak soon because metal deteriorates from inside out.

Handles become difficult to turn or feel loose and wobbly. Worn internal parts cause both problems. Hard-to-turn handles mean mineral deposits fused components together. Loose handles indicate stripped screws or damaged mounting hardware. Both situations get worse without repair.

Water pools around the faucet base during use. Failed O-rings or seals let water escape. The water runs down into your cabinet. You see moisture or water stains under the sink. This leak damages cabinets and creates mold.

Strange noises happen during faucet operation. Squealing sounds mean loose washers vibrating. Banging indicates water hammer from loose parts. These noises signal internal component failure. The faucet will leak or break soon.

Inconsistent water temperature makes showers and washing difficult. The mixing valve inside isn't working properly. Mineral deposits interfere with temperature control. You get sudden hot or cold bursts unexpectedly.

Faucets over 15 years old with recurring problems should be replaced. Multiple repairs on old faucets cost more than new installation. Parts become obsolete and unavailable. Modern faucets perform better and waste less water.

Cartridge replacement becomes necessary when specific symptoms appear. Handles get hard to turn despite cleaning. Temperature won't adjust properly anymore. The faucet drips when turned completely off. Dallas hard water damages cartridges faster than in softer water areas.

Repair makes sense for single issues on newer faucets under 10 years old. One dripping handle can be fixed with new washers. Low pressure often needs just aerator cleaning. Simple repairs extend faucet life for years.

Replacement is smarter for multiple issues, age over 15 years, or outdated styles. When you fix one problem and another appears immediately, the whole faucet is failing. Older homes in Lakewood and East Dallas often have outdated faucet styles worth upgrading. New faucets improve function and appearance together.

Dallas hard water causes faster mineral buildup and cartridge failure than national averages. Faucets here need more frequent maintenance and earlier replacement. We help you make the repair versus replacement decision based on your specific faucet condition.

Professional faucet installation prevents leaks, protects warranties, and saves money long-term. Understanding the difference between licensed plumbers and handymen helps you make the smart choice. Here's why proper installation matters for Dallas homes.

Yes, we install faucets you bought from any store. Bring your faucet from Home Depot, Lowe's, Amazon, or specialty retailers. We install it correctly with proper connections and sealing. Keep your receipt and make sure all parts and hardware came in the box.

Call a licensed plumber for kitchen and bathroom faucet installation. Plumbers have the training, tools, and licenses for proper work. We handle both simple replacements and complex installations. Licensed work protects your home and investment.

Handymen lack critical qualifications for faucet work. They don't hold plumbing licenses required by Texas law. Most carry no liability insurance for water damage. They may not know Dallas plumbing code requirements. Their work often voids manufacturer warranties. They can't pull permits when installations require them.

Professional installation provides advantages DIY and handymen can't match. We make proper supply line connections that don't leak. Correct mounting and sealing prevents base leaks. Our work comes with leak-free operation guarantees. Manufacturer warranties stay valid with licensed installation. Everything meets Dallas code requirements. Our liability insurance covers any issues.

Common installation mistakes cause expensive problems. Cross-threaded connections leak within weeks. Improper sealing around the base lets water into cabinets. Wrong supply line sizes restrict water flow. Over-tightening cracks porcelain or fixture bodies. Missing small parts gets overlooked until leaks appear.

Dallas code compliance matters when selling your home. Inspectors check for proper installations. Unpermitted work causes delays or deal cancellations. Insurance claims can be denied for unpermitted plumbing. Licensed plumber installation protects your property value.

We handle unexpected issues during installation. Corroded shutoff valves break when turned. Old supply lines crack during removal. Non-standard mounting holes need adapters. Outdated plumbing connections require updates. These problems stop DIY projects but we fix them immediately.

Professional installation is faster than DIY attempts. We complete most faucet installations in 1-2 hours. DIY projects take half a day with multiple trips to stores for forgotten parts. Handymen often lack proper tools and make multiple visits. Time is money.

Older homes in Lakewood and East Dallas often need supply line updates during faucet replacement. Galvanized pipes and corroded valves are common. We identify and fix these issues during installation. You get a complete solution, not just a new faucet on old failing parts.

Understanding the installation process helps you prepare and know what happens in your home. Most faucet installations follow predictable steps. Here's the complete timeline from arrival to testing.

Most faucet installations take 1-2 hours from start to finish. Simple bathroom faucet replacements go faster. Kitchen faucets with sprayers take slightly longer. We give you accurate estimates after seeing your specific situation.

Yes, we turn off your water supply before starting work. We shut off water at the valves under your sink. If those valves don't work, we use your home's main shutoff. The water stays off during installation only. You'll have water back within 1-2 hours.

Installation follows proven steps for leak-free results. We turn off the water supply first. Old faucet and supply lines get disconnected carefully. We clean the mounting surface thoroughly. New faucet mounting hardware installs securely. Fresh supply lines connect to shutoffs. The faucet body attaches properly. All connections get tested for leaks. Handles and temperature mixing get adjusted.

We bring everything needed for proper installation. New supply lines install if yours are old or damaged. Proper tools prevent fixture damage. Mounting hardware comes with your faucet. Cleanup materials leave no mess. You don't need to provide anything except the new faucet if you bought it.

Have your new faucet ready if you purchased it yourself. Clear access to the work area helps us start quickly. Remove items from under the sink. The faucet box should include all parts and installation instructions.

Common problems get resolved during installation, not after. Corroded shutoff valves break when turned after years of non-use. We replace them immediately. Damaged supply lines crack during removal. Calcium buildup makes old nuts impossible to remove without special tools. Non-standard sink holes need adapter plates. We handle all these issues.

Water shutoff typically lasts 1-2 hours during installation. You can't use that sink while we work. Other faucets in your home keep working. Plan accordingly for kitchen or main bathroom installations. We work efficiently to restore water quickly.

Testing includes multiple checks before we finish. Every connection gets inspected for leaks. We run water at full pressure. Temperature mixing gets tested and adjusted. Handle operation is verified smooth. Sprayers get tested if your faucet has them. You see everything working before we leave.

Cleanup is included in every installation. We dispose of your old faucet properly. The work area gets wiped down completely. No mess or old parts remain. Your home looks clean when we finish.

Older Dallas homes built before 1980 often have complications. Shutoff valves corrode and need replacement. Hard water mineral buildup fuses connections together. We account for these issues in our timeline. Experience with older homes helps us work efficiently despite challenges.

Kitchen faucets are slightly more complex than bathroom faucets. Sprayer connections add steps. Larger units require more careful mounting. Deck plate installations take extra time. We handle both types expertly.

Understanding typical faucet failures helps you recognize problems and know what's fixable. Dallas water conditions create specific challenges. Here are the issues we repair most often.

Dripping from the spout indicates internal wear. Worn cartridges no longer seal water flow completely. Damaged washers let water seep through. Mineral buildup prevents proper closure. The drip gets worse over time as parts deteriorate further.

Low water pressure has multiple causes. Clogged aerators restrict flow as minerals accumulate. Cartridges get blocked by sediment. Supply line issues reduce pressure. Dallas hard water causes aerator clogs faster than national averages. Monthly aerator cleaning prevents this problem.

Leaking around the base damages cabinets. Failed O-rings let water escape during use. Loose mounting allows water past seals. Cracked faucet bodies leak water you can't see until damage appears. Check under sinks monthly for early leak detection.

Hard-to-turn handles frustrate daily use. Mineral buildup inside cartridges fuses moving parts. Worn internal components bind instead of turning smoothly. Corrosion from age makes handles stiff. Dallas water accelerates mineral accumulation inside faucets.

Temperature control problems make faucets unreliable. Faulty mixing cartridges can't regulate hot and cold properly. Mineral deposits interfere with temperature valves. You get sudden temperature swings during use. The mixing valve needs replacement.

Noisy operation signals loose components. Washers vibrate when loose and create squealing sounds. High water pressure causes rattling. Water hammer from loose parts makes banging noises. These sounds indicate parts failing soon.

Corroded finish looks bad and indicates deeper problems. Age breaks down protective coatings. Water chemistry attacks finishes. Harsh cleaners damage surfaces. Exterior corrosion often means internal corrosion too.

Calcified faucets present unique Dallas challenges. Hard water minerals literally fuse metal parts together. Disassembly becomes difficult without damaging fixtures. Special techniques and tools remove calcified components. This happens throughout Dallas due to our water chemistry.

Bathroom damage occurs most often at specific locations. Under-sink connections develop slow leaks that go unnoticed. Water pools around faucet bases from failed seals. Supply line connections corrode from age and minerals. These areas need regular inspection.

Many issues are repairable without replacement. Cartridge replacement fixes dripping and temperature problems. Aerator cleaning restores water pressure. New O-rings stop base leaks. Handle adjustments fix loose or stiff operation. Repairs cost less than replacement for newer faucets.

Replacement becomes necessary for certain failures. Cracked faucet bodies can't be repaired. Extensively corroded internals mean the whole unit is failing. Obsolete parts become unavailable for very old faucets. Multiple problems indicate complete faucet failure.

Proper maintenance extends faucet lifespan significantly and prevents premature replacement. Dallas hard water requires more attention than national averages. Here's how to maximize your faucet investment.

Average faucet lifespan runs 15-20 years with proper care. Dallas hard water shortens this to 10-15 years typically. Quality brands last longer than budget models. Regular maintenance adds years to any faucet. Neglect causes early failure.

Clean aerators every 3-6 months in most areas. Dallas hard water requires monthly aerator cleaning. Remove the aerator by unscrewing it. Soak in white vinegar to dissolve minerals. Rinse thoroughly and reinstall. This simple task prevents most low-pressure problems.

Wipe your faucet daily to prevent buildup. Water spots contain minerals that accumulate. Daily wiping keeps surfaces clean. Use mild soap and water only. Dry with a soft cloth after cleaning.

Never use abrasive cleaners on faucet finishes. Scratches damage protective coatings. Steel wool and scouring pads ruin surfaces. Harsh chemicals corrode finishes. Stick with gentle soap and water.

Address drips immediately to prevent larger damage. Small drips indicate early washer or cartridge wear. Quick repairs prevent complete failure. Ignoring drips causes more expensive problems. The issue gets worse over time.

Don't over-tighten handles during normal use. Excessive force stresses internal parts. Handles should turn easily when working properly. Hard turning means something needs repair. Over-tightening damages threads and seats.

Check under-sink connections monthly for moisture. Early leak detection prevents cabinet damage. Look for water stains and dampness. Tighten loose connections immediately. Small leaks become big problems if ignored.

Use proper lubrication on internal faucet parts. Silicone-based plumber's grease works on O-rings and cartridges. This lubricant is safe for potable water systems. Apply during cartridge replacement or repairs. Never use petroleum-based products inside faucets.

WD-40 has limited appropriate uses with faucets. Spray it on calcified mounting nuts during replacement to help loosening. Use it to clean exterior finishes. These are external applications only. Never spray WD-40 inside faucet mechanisms.

Never spray WD-40 in these locations. Don't spray inside faucet cartridges or valves. Keep it off O-rings because it degrades rubber. Avoid any water contact areas inside the faucet. WD-40 isn't rated for potable water systems.

Silicone-based plumber's grease is the best internal lubricant. It's specifically designed for faucet cartridges. The formula is safe for drinking water. It protects O-rings without degrading rubber. Use this for all internal faucet lubrication needs.

Dallas-specific maintenance is more intensive. Descale monthly instead of seasonally. Consider whole-house water softeners to reduce mineral damage. Wipe faucets dry after each use to prevent deposits. These extra steps significantly extend faucet life in our hard water.

Cartridge inspection every 5 years catches problems early. Preventive cartridge replacement avoids emergency failures. We inspect cartridges during routine service calls. Replacing cartridges before complete failure prevents leaks and damage.

Baker Brothers handles all faucet services throughout Dallas and surrounding areas. We've served Dallas homeowners since 1945 with expert installation, repair, and maintenance. Our licensed plumbers install faucets you buy or recommend quality options that fit your budget and needs.

Same-day service is available for most faucet problems including drips, leaks, and installation requests. We work on kitchen faucets, bathroom faucets, and specialty fixtures with equal expertise. Licensed installation protects manufacturer warranties and prevents future leaks.

Call (214) 324-8811 for faucet service in Dallas. Located at 2615 Big Town Blvd, Mesquite, TX 75150.