How to Read a Home Repair Quote Like a Baker Brothers Technician
TL;DR: A complete home repair quote tells you who's doing the work and their state license number, what the technician found, exactly what they'll do, which parts go in, whether a permit is needed, what's guaranteed and what happens if they find more. If a line is missing, ask for it before you sign.
The technician handed you the quote and stepped out to the truck. Here's how we'd read it if we were sitting at your kitchen table with you: top to bottom, one line at a time.
What Should a Complete Home Repair Quote Tell You?
A repair quote is a written description of a job with a price at the bottom. That price covers the work written above it and nothing else, so read those lines first.
A complete quote for plumbing, HVAC or electrical work answers seven questions:
- Who's doing the work? The company's name, contact details and state license number.
- What did they find? The problem in plain words, and how they know.
- What will they do? Every task, plus anything that isn't included.
- What's going on? The brand, model and size of the parts or equipment.
- Does it need a permit? And who pulls it.
- What's guaranteed? Parts and labor terms, and who backs them.
- What's the price, and what happens if they find more? One firm number for this work, when it's due and how changes get handled.
Read a quote in that order, with the total last. If you're holding two quotes and trying to figure out why the totals are so far apart, that's a different question, and our post on why one repair quote can be so much higher than another for the same job walks through it.
How Do You Know Who's Doing the Work?
Look for a license number first. Texas requires one on every written proposal and invoice in all three trades. A plumbing quote has to show the Responsible Master Plumber's name and license number on the first page, in at least 12-point type, under 22 TAC 367.10. An HVAC quote has to show the license number of the air conditioning contractor the company works under (16 TAC 75.71), and an electrical quote has to show the electrical contractor's license number (16 TAC 73.51).
The same paperwork has to tell you who regulates the company. HVAC and electrical quotes carry a line that starts "Regulated by The Texas Department of Licensing and Regulation," followed by that state agency's mailing address, phone numbers and website. Plumbing quotes say "regulated by the Texas State Board of Plumbing Examiners" and list the board's address, phone number and website. If either the license number or the regulator line is missing, ask about it before you sign.
Before a Baker Brothers visit, our Meet Your Technician message tells you who's coming, with their photo, bio and reviews, so you know the name on the quote before the truck pulls up.
Does the Quote Say What the Technician Found?
A good quote says what's wrong before it says what to fix. "Replace capacitor" is a fix. "Capacitor tested out of range, outdoor fan won't start" is a finding, and it's the part that tells you why you're paying for the fix.
Look for three things here: what failed or what condition the technician found, how they know and what it's causing in your home. The "how they know" can be a test reading, a pressure test, a camera inspection or a photo of the part. On a sewer call, a finding might read "camera inspection found a cracked cast iron line under the slab, which is why the kitchen drain keeps backing up." On an electrical call: "main breaker shows heat damage and trips under normal load."
If the quote only lists the fix, ask the technician to write down what they found, or better, to show you. That's how Baker Brothers works on every call. We diagnose the problem, show you what's wrong and put a firm price in writing, and nothing gets repaired until you say yes. It's also why we don't give a firm price over the phone: until a technician has looked at the equipment, any number is a guess.
“The most important thing a homeowner should look for on a quote is the reason behind the recommended repair. We want our customers to understand exactly what we found, why it needs attention, and how the repair will solve the problem. An informed customer is a confident customer, and that's how we believe business should be done.” - Chris, Vice President of Plumbing, Baker Brothers Plumbing, Air & Electric
What Exactly Will They Do, and What's Left Out?
The scope of work is the list of tasks the price covers. It should read like a short work order: what comes out, what goes in, what gets connected, how it's tested and who hauls the old equipment away. A water heater replacement quote, for example, should say whether removing and disposing of the old tank is part of the job and how the new one gets tested before the technician leaves.
Then look for what the price doesn't cover. On any job where someone has to open a wall, a floor or the yard, like slab leak, sewer or rewiring work, ask about drywall or ceiling patching, concrete, landscaping and paint. A quote that says nothing about them leaves you guessing about who puts your house back together. On sewer work, ask whether backfill and sod are included.
This part of the quote should also tell you how long the job should take and whether you'll be without water, power or air conditioning for any of it. If you need to be home, clear out a closet or open up attic access, the quote or the technician should tell you before the day of the job.
What's Going Into Your Home?
For anything bigger than a small part, the quote should name the brand, model and size of what's being installed. Two quotes that both say "new water heater" can be describing very different equipment.
What to look for, by trade:
- Water heater: tank or tankless, capacity, fuel type (gas or electric) and model number.
- Air conditioner or heat pump: tonnage, SEER2 efficiency rating, refrigerant type and model numbers for both the outdoor unit and the indoor coil or air handler.
- Electrical panel: brand, amperage and how many circuits it holds.
For repairs, ask whether the replacement part comes from the original manufacturer or is a universal part made to fit.
“When you’re replacing an air conditioner or heat pump, you should know exactly what equipment you’re getting, including the system’s size, efficiency rating, and model. We recommend equipment and replacement parts that meet the manufacturer’s specifications and are the right fit for your system. That’s what keeps it running reliably for years.” - Roger Frosini, Vice President of HVAC, Baker Brothers Plumbing, Air & Electric
Does the Job Need a Permit, and Who Pulls It?
Plenty of plumbing, HVAC and electrical work needs a city permit and an inspection, and a complete quote says whether yours does. The Texas State Board of Plumbing Examiners tells homeowners to check with their city's inspection department to see whether a job needs a permit and inspection. Each DFW city runs its own permitting, so the answer for a job in McKinney may differ from the answer in Arlington.
Ask about it on replacement work in particular: a water heater, an AC or furnace system, an electrical panel or a sewer line. The quote should say whether a permit is part of the job, who pulls it and whether the inspection is included in the price.
A permitted job gets checked by a city inspector and leaves a record with the city that you can point to later, whether you're selling the house or talking to your insurance company.
“A panel replacement quote should clearly lay out the scope of work and whether you need a permit. Every city’s requirements are a little different, so we handle the permits for you and note it on the invoice when one is being pulled. That way, you know what’s going on from start to finish, and you know the work’s being done safely and up to code.” - James Sottero, VP of Electrical, Baker Brothers Plumbing, Air & Electric.
What's Guaranteed, and Who Stands Behind It?
The guarantee terms belong on the quote in writing. Look for four things: whether it covers parts, labor or both; how long it lasts; who honors it, whether that's the manufacturer, the company that did the work or both; and anything you have to do to keep it in force, like scheduled maintenance.
Manufacturer warranties and company guarantees are separate promises. A manufacturer warranty covers the equipment on the manufacturer's terms. Whether the labor to replace a failed part is covered depends on the company that installed it, so look for that line by name.
You'll find Baker Brothers' warranty and guarantee terms on our warranties page. If the guarantee terms aren't written on your quote, ask for them before you sign.
What Should the Price Section Tell You?
The price section should give you one firm number for the work the quote describes. "Starting at" language or a price range is a sign the scope isn't settled yet, and it's worth asking what would move the number.
A complete price section covers:
- One firm price for the scope written on the quote.
- Options side by side when there's a real choice to make, like repairing now or replacing.
- When payment is due, and whether a deposit is required.
- How long the quote is good for. Parts and equipment prices change, so a quote should carry a date.
- Any diagnostic or trip fee, and whether it's credited toward the repair.
- What happens if they find more. If a technician opens a wall or pulls a part and finds something new, the work should stop, you should see what changed and you should get a new written price before anything continues.
At Baker Brothers, the final bill matches the price you approved before work started. If you have a second written estimate for a panel, generator or rewiring job, our electrical price match compares the two on the same scope, materials and specifications.
“We don’t charge a standard diagnostic fee. We charge a trip fee, and the amount depends on whether you’re a Family Plan member, whether it’s a commercial call, and whether we’re coming out during regular business hours, after hours, or on a weekend. That fee is separate from the cost of the repair, and we don’t start any repair until you’ve approved the price. If we find something else during the job, we’ll give you an updated quote and get your approval before moving forward.” - Roger Frosini, VP of HVAC, Baker Brothers Plumbing, Air & Electric
A Repair Quote Checklist for the Kitchen Table
Use this before you sign any plumbing, HVAC or electrical quote. Every row should have an answer on the paper in front of you.
On the quote | What complete looks like | If it's missing, ask |
|---|---|---|
License and state notice | License number plus the "Regulated by" line with the state's contact information | "What's your license number?" |
What they found | The failed part or condition, and how they know | "Can you show me?" |
Scope of work | Every task, plus what isn't included | "What isn't covered here?" |
Parts and equipment | Brand, model and size of what goes in | "What exactly are you installing?" |
Permit | Whether one's needed and who pulls it | "Does this job need a permit?" |
Guarantee | Parts and labor terms, how long, who backs it | "What's covered, and for how long?" |
Price and payment | One firm price, when it's due, how long it's good for | "Is this the final price for this work?" |
Changes | What happens if they find more once work starts | "What happens if you find something else?" |
A quote that answers every row is one you can sign without second-guessing. Not sure what the quote in front of you covers? Call us. A licensed Baker Brothers technician will look at the problem, show you what we find and put a firm price in writing before any work starts.
Frequently Asked Questions
What should a written home repair estimate include before I sign it?
A complete written estimate for plumbing, HVAC or electrical work should include the company's name, contact details and Texas license number; what the technician found and how they know; every task in the scope of work and anything not included; the brand, model and size of parts or equipment; whether a permit is needed; the parts and labor guarantee; and one firm price with payment terms and an expiration date.
Does a Texas plumbing, HVAC or electrical company have to put its license number on a quote?
Yes. Texas requires plumbing, air conditioning and electrical contractors to print their license number on every written proposal and invoice, along with the name and contact information of the state agency that regulates them: the Texas Department of Licensing and Regulation for HVAC and electrical work, and the Texas State Board of Plumbing Examiners for plumbing.
Is it normal to pay a diagnostic or trip fee to get a repair quote?
Some home service companies charge a diagnostic or trip fee to send a technician to your home, and some credit that fee toward the repair if you go ahead. The company should tell you whether there's a fee and how it's applied before the technician arrives, and the quote should show it.
What happens if the technician finds more work after the job starts?
Work should stop, the technician should show you what they found and you should get a new written price before anything else is done. At Baker Brothers, nothing gets repaired until you approve the price, including anything found once a job is underway.
How can I tell if a repair quote is fair without getting more bids?
Check whether the quote is complete: a license number, a finding the technician can show you, a written scope, named parts and equipment, a permit answer, written guarantee terms and one firm price. A complete quote explained in person tells you more than a stack of bare numbers, and when you do compare two quotes, make sure both describe the same work. Our post on why one repair quote can be so much higher than another for the same job covers that comparison.
About the Author
Roger Frosini is Vice President of HVAC at Baker Brothers Plumbing, Air & Electric, where he oversees heating and air conditioning service across the Dallas-Fort Worth metroplex. Baker Brothers Plumbing, Air & Electric is a licensed plumbing, HVAC and electrical contractor serving Dallas-Fort Worth since 1945.
Related Reading
If you're comparing two quotes, see why one repair quote can be so much higher than another for the same job. For questions to ask before hiring an electrician, see how to choose the right electrician in Dallas. For ongoing maintenance and member benefits, see the Baker Brothers Family Plan.
Methodology
This post combines the written-proposal and invoice requirements in the Texas Administrative Code for plumbing, air conditioning and electrical contractors, consumer guidance from the Texas State Board of Plumbing Examiners and the field practice of Baker Brothers' plumbing, HVAC and electrical leadership. It cites no dollar figures or price ranges. Confirm permit requirements for your address with your city.
Sources & Further Reading
- Texas Administrative Code, 22 TAC 367.10: Display of RMP Name and License Number
- Texas Administrative Code, 16 TAC 75.71: Responsibilities of the Contracting Company (air conditioning and refrigeration)
- Texas Administrative Code, 16 TAC 73.51: Electrical Contractors' Responsibilities
- Texas State Board of Plumbing Examiners: Consumer Information
- Baker Brothers: Warranties
- Baker Brothers: Meet Your Technician
- Baker Brothers: Electrical Price Match Guarantee